Post by FeralMaster on Jul 20, 2013 20:29:51 GMT
Allo! I'm gonna teach you guys some codes, if you don't know them already.
---------------------------------------------------
Here is a simple tutorial on how to smear ^^
As you can see, beside the smiley icon above the place where you create a thread the red to blue thingy. Click on that, then type whatever you want in the middle of the two codes, then it should look like this:
[smear:FF0000]It should look like this![/smear:00FF00]
But you probably want to do different colours, right? Here's a tutorial on how!
1. First you want to chose the smear option, then the two codes will pop up. You see how the first one says FF0000 and the second one says 00FF00? Well, we're going to change those codes.
2. At the top below the Subject/Title, you see the B I U andS? Beside the B they're is a colourful circle thingy xD
3. For this part I would suggest getting a piece of paper to write on, a pen or pencil too.
4. Now click on the colourful circle, then choose a colour you want to use. Now, look at the code below the square with the colour you chose, such as the top corner of red is going to be ff0000 and so on. Write down that code, then exit the colour panel.
5. Now go to your two codes. In the first or second one, erase the FF0000 or 00FF00 then type in the code you chose. For this I will use the code 1400ff for the first code.
6. Repeat the steps 4 and 5, but with another colour code. For my second one I will be using ff49f8.
7. Now that you have those two codes typed in, write whatever you want in the middle of those two codes! So the one I chose should look like this:
[smear:1400ff] It should look like this, but with whatever colours you chose! Now go try it! : D[/smear:ff49f8]
Remember not to use < or > in the smear, or it turns up as [smear:FF0000] < and > [/smear:00FF00]
-----------------------------------------------------------
The bold code is simple, all you need to do is...
1. Write what you want to be bold
2. Put the code [.b] infront of the words you want bolded
3. Put the code [./b] after them
4. Ignore the dots (.)
Then the words should look something like this!
-----------------------------------------------------------------------
Letters tilted to the side is easy, you just need to...
1. Type what you want in tilted letters
2. Put the code [.i] infront of it
3. Put the code [./i] after it
4. Ignore the dots (.)
Then it should look like this!
------------------------------------------------------------------
The underline code is almost the same...
1. Type what you want underlined
2. Put the code [.u] infront of it
3. Put the code [./u] after it
4. Ignore the dots (.)
Then it should look like this!
--------------------------------------------------------------------
Crossing out the letters is almost the same too. All you need to do is change the letters...
1. Type what you want crossed out
2. Put the code [.s] infront of it
3. Put the code [./s] after it
4. Ignore the dots (.)
Now it should look like this!
-----------------------------------------------------------------------
Now for the spoiler code! All you do is...
1. Type what you want put in a spoiler
2. Put the code [.spoiler] infront of it
3. Put the code [./Spoiler] after it
4. Ignore the dots (.)
---------------------------------------------------------------
Hope this helped ^.^
---------------------------------------------------
Here is a simple tutorial on how to smear ^^
As you can see, beside the smiley icon above the place where you create a thread the red to blue thingy. Click on that, then type whatever you want in the middle of the two codes, then it should look like this:
[smear:FF0000]It should look like this![/smear:00FF00]
But you probably want to do different colours, right? Here's a tutorial on how!
1. First you want to chose the smear option, then the two codes will pop up. You see how the first one says FF0000 and the second one says 00FF00? Well, we're going to change those codes.
2. At the top below the Subject/Title, you see the B I U and
3. For this part I would suggest getting a piece of paper to write on, a pen or pencil too.
4. Now click on the colourful circle, then choose a colour you want to use. Now, look at the code below the square with the colour you chose, such as the top corner of red is going to be ff0000 and so on. Write down that code, then exit the colour panel.
5. Now go to your two codes. In the first or second one, erase the FF0000 or 00FF00 then type in the code you chose. For this I will use the code 1400ff for the first code.
6. Repeat the steps 4 and 5, but with another colour code. For my second one I will be using ff49f8.
7. Now that you have those two codes typed in, write whatever you want in the middle of those two codes! So the one I chose should look like this:
[smear:1400ff] It should look like this, but with whatever colours you chose! Now go try it! : D[/smear:ff49f8]
Remember not to use < or > in the smear, or it turns up as [smear:FF0000] < and > [/smear:00FF00]
-----------------------------------------------------------
The bold code is simple, all you need to do is...
1. Write what you want to be bold
2. Put the code [.b] infront of the words you want bolded
3. Put the code [./b] after them
4. Ignore the dots (.)
Then the words should look something like this!
-----------------------------------------------------------------------
Letters tilted to the side is easy, you just need to...
1. Type what you want in tilted letters
2. Put the code [.i] infront of it
3. Put the code [./i] after it
4. Ignore the dots (.)
Then it should look like this!
------------------------------------------------------------------
The underline code is almost the same...
1. Type what you want underlined
2. Put the code [.u] infront of it
3. Put the code [./u] after it
4. Ignore the dots (.)
Then it should look like this!
--------------------------------------------------------------------
Crossing out the letters is almost the same too. All you need to do is change the letters...
1. Type what you want crossed out
2. Put the code [.s] infront of it
3. Put the code [./s] after it
4. Ignore the dots (.)
-----------------------------------------------------------------------
Now for the spoiler code! All you do is...
1. Type what you want put in a spoiler
2. Put the code [.spoiler] infront of it
3. Put the code [./Spoiler] after it
4. Ignore the dots (.)
And that's how to add a spoiler! C:
---------------------------------------------------------------
Hope this helped ^.^